Digilent

Cmod S7

Breadboardable Spartan-7 FPGA Module

Contact Our Expert

Get a Quote

Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
- 3,650 slices containing four 6-input LUTs and 8 flip-flops
- 1,620 Kbits of fast block RAM
- Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
- 80 DSP slices
- Internal clock speeds exceeding 450 MHz
- On-chip analog-to-digital converter (XADC)
- Programmable over JTAG and Quad-SPI Flash
Memory
- 4 MB Quad-SPI Flash
Power
- Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
USB
- USB-JTAG programming circuitry
- USB-UART bridge
Push-buttons and LEDs
- 2 Buttons
- 4 LEDs
- 1 RGB LED
Expansion Connectors
- 1 Pmod connector
  - 8 total FPGA I/O
- 48-pin DIP form-factor headers
  - 36 populated pins
    - 32 total FPGA I/O
    - 2 Single-ended 0-3.3V analog inputs to XADC

Product Compliance:

HTC: 8473301180
ECCN: EAR99

The Cmod, or Carrier Module, family of products is designed to offer quick, simple, and flexible integration of an FPGA into circuit design, prototyping, and learning/hobby projects.

The Digilent Cmod S7 is a small, 48-pin DIP form factor board, populated with 36 pins, built around a Xilinx® Spartan®-7 FPGA that brings FPGA power and prototyping to a solderless breadboard.

The board includes a Quad-SPI flash for programming, as well as a USB-JTAG programming circuit and USB-UART bridge. The Cmod S7 also features a clock source, Pmod port, and onboard I/O with LEDs and pushbuttons. There are 32 FPGA I/O signals, 2 FPGA analog input signals, an external power input rail, and ground that are routed to 100-mil-spaced through-hole pins, making the Cmod S7 compatible with solderless breadboards. This form factor makes the Cmod S7 a great option for flexible and affordable prototyping, or learning FPGA and digital logic circuits. At just .7" by 3.05", it can also be loaded in a standard socket and used in embedded systems.

The Spartan-7 FPGA on the Cmod S7 fits performance into a small form-factor packaging. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces.

Cmod S7

Artix-7 FPGA Development Board with SYZYGY-compatible Expansion

Cmod S7

Trainer Board for Multimedia Applications

Cmod S7

ARM/FPGA SoC Development Board

Cmod S7

Zynq Ultrascale+ MPSoC Development Board

Cmod S7

Zynq-7000 Single Core for ARM/FPGA SoC Development

Cmod S7

Breadboardable Artix-7 FPGA Module

Cmod S7

Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

Cmod S7

Zynq-7000 SoC Development Board

Cmod S7

Zynq-7000 ARM/FPGA SoC Development Board

Cmod S7

Kintex-7 FPGA Development Board

Cmod S7

Spartan-7 FPGA Development Board

Cmod S7

Python Productivity for Zynq-7000 ARM/FPGA SoC

The Cmod S7 can be programmed with Digilent's Adept software. Digilent Adept is a unique and powerful solution which allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.

To create and modify designs for your Cmod S7, you can use Xilinx's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. Both variants of the Cmod S7 are supported by the free WebPACK edition of the Vivado Design Suite.

If you are using the MicroBlaze Soft Processor Core from Xilinx, you can make use of the Vitis Core Development Kit or Xilinx Software Development Kit to create embedded applications for your Cmod S7.

System Boards

Kumpulan Abex Sdn Bhd

Digilent

Cmod S7

System Boards