Home | Products | FTTX | Fiber Cable
Pre-Terminated Indoor Riser Cable
OIPDCE7A1LW1XXXX
1/6
Product Overview
The Pre-Terminated Indoor Riser Cable is designed to be used in FTTX Applications. Each Core of Cable is protected by 2.0mm Tube separately at the fanout.
The ends of fibers are terminated with SC/UPC Connectors. This datasheet covers the specifications of the fiber connectors and the single mode optical fiber cables in compliant to ITUT G.657A1.
Specifications
Characteristic | Parameter |
|---|---|
Connector | FC, SC, ST, LC, MU, SMA, E2000, MTRJ |
Fiber Type | SM |
Polishing | UPC , APC |
Insertion Loss (dB) | ≤0.2 (UPC) , ≤0.3 (APC) |
Return Loss (dB) | ≤55 (UPC) , ≤65 (APC) |
Optical Cable Diameter | 5.5mm (8C, 12C, 16C, 24C and 26C) 7.5mm (48C) |
Exchangeability (dB) | ≤0.2 (Randomly Connected) |
Vibration | ≤0.2 (5~50Hz, 1.5mm Amplitude) |
Working Temperature (°C) | ≤0.2 (40 ~ +80°C, 21 Cycle) |
Features
-
Supplied as Standard with Fanout Kit and Pulling Eye
-
100% Tested for Insertion Loss and Return Loss
-
Better IL and ORL Performance, Improved Installation Cost & Time
-
Connector Tensile Strength 70N
End to End without Cable Join -
Number Labeling with Each Core of Cable
-
Easy for Cable Management (Plug & Play only)
-
TM Type Approval with SIRIM Test Report
Note:
Specifications are subject to change without notice
Ordering Information
Part No. | Description |
|---|---|
OIPRC7A1LB8XXXX | One End of Two End Pre-Terminated Indoor Riser Cable |