Pre-Terminated Cable 

Distribution Cable Fan-out Cord
Distribution Cable Fan-out Cord

press to zoom
Distribution Cable Fan-out Cord
Distribution Cable Fan-out Cord

press to zoom

press to zoom
Distribution Cable Fan-out Cord
Distribution Cable Fan-out Cord

press to zoom
1/5

Product Overview
Pre-terminated cable combines individual cables into one single bundle as convenient to use cord cables. They come with various structures and connector options with pre-terminated fan-out fiber pigtails at either one end or both ends. We use either bundle fiber cables or ribbon fiber cables to produce the assemblies.

Fan-out fibers terminated with FC, SC, LC, ST, MU, or E2000 connectors with PC, UPC or APC end-face. To easily identify the multiple fiber cables, 0.9mm cable itself is constructed with different colors, whereas 2mm OD cable have number labeling at each of the cable end.

Specifications

Screenshot 2022-04-29 13.33.51.png

Material

Screenshot 2022-04-29 13.33.55.png

Features

  • Single cable assembly with multiple fiber termination options

  • Various types of fiber cable jackets and lengths

  • FC, SC, LC, ST, MU, MT or E2000 connector types

  • High precision zirconia ceramic ferrule (except MT-RJ with thermoplastic) protected by dust cap

  • Low insertion loss, high repeatability and stability

  • Free from index matching gel

  • Available connector surface polishing: UPC and APC*1

  • Operating temperature in compliance with IEC 61753-1 Table A.1

  • Latching mechanism in accordance to IEC61754*2

  • Factory terminated connectors minimizing the insertion loss

  • Cost effective solution that eliminates
    on-site splicing

  • Reduced cable diameter to save riser and cable tray space

Note:
*1 Differentiated by color: dark blue for UPC; green for APC
*2 Latching mechanism with adapter in accordance with IEC61754-2 for ST connectors; -4 for SC connectors; -6 for MU connectors; -7 for MPO/MTP connectors; -13 for FC connectors; -15 for E2000 connectors; -20 for LC connectors
*3 Other fiber count available upon request
*4 Typical jacket thickness = 1±0.05mm; cable diameter subject to availability of the cable types.
*5 For connector specifications, Environmental Test and Geometry specifications, please refer to “Patchcords and Pigtails” datasheet.
*6 E2000 connectors are R&M

Ordering Information

Screenshot 2022-04-29 13.34.16.png

Note : Specifications are subject to change without prior notice